Live centers and dead points

SERIES SPCD – Live center with differential load
Morse Taper 3-4-5 / cylindrical Ø22-28-32

Suitable for CNC lathes with counterspindle and double turret

SERIES POWER 60° / T – High precision live center with draw-off nut
Morse Taper 3-4-5-6 / point at 60° / double incline

Suitable for CNC lathes from 1000 to 3000 RPM

SERIES POWER FS – High precision live center with draw-off nut
Morse Taper 3-4-5 / point at 60° / interchangeable points / double incline

Suitable for CNC lathes

SERIES POWER P – High load live center with draw-off nut
Morse Taper 3-4-5-6-7-M80-M100 / point at 60° / point for flange

Suitable for CNC lathes, milling and gear hobbing machines

SERIES POWER MF – Live center with integral point at 60° for tubes
Morse Taper 3-4-5-6 / integral point at 60°

Suitable for CNC and conventional parallel lathes for tubes

SERIES POWER R for grinding – Live center with hard metal point for grinding
Morse Taper 3-4-5 / point at 60° / point Ø 9,7-10-15 according to lengths – on demand

Suitable for CNC and conventional grinding machines

SERIES SP – High speed live center without draw-off nut
Morse Taper 2-3-4-5 / point at 60° / double incline / interchangeable point / with draw-off nut for DMG lathes

Suitable for high speed 2000 /4000 RPM CNC lathes and conventional ones

SERIES SP/T and SERIES SP/FS – OUT OF PRODUCTION

SERIES AM – Low speed live center without draw-off nut
Morse Taper 3-4-5 / point at 60° / double incline

Suitable for conventional parallel lathes

SERIES AM/T and Art. AM6 – OUT OF PRODUCTION

SERIES MA – Live center with chuck for cylindrical pieces hold
Morse Taper 4-5-6-7-M80-M100 / point at 60° / cylindrical point for chuck

Suitable for CNC and conventional lathes for tubes

DEAD POINT for turning – Dead point with draw-off nut, hard metal or hardened steel
Morse Taper 3-4-5-6-M80-M100 / point at 60° extended / double incline / interchangeable point / point for flange

Suitable for lathes with rolling body tailstock

DEAD POINT for grinding – Dead point with draw-off nut, hard metal or hardened steel
Morse Taper 3-4-5-6 / point at 60° extended / double incline / interchangeable point / point for flange

Suitable for lathes with rolling body tailstock